ZS Clamp-On Sensors ZS-CLAMP
ZS Clamp-On Sensors ZS-CLAMP Carrier ZS Sensor Air Conditioner Sensor Selangor, Malaysia, Kuala Lumpur (KL), Singapore, Puchong, Petaling Jaya (PJ), Pandan Jaya Supplier, Suppliers, Supply, Supplies | United Faith Sdn Bhd
The Carrier ZS line of communicating clamp-on strap sensors are designed to monitor water temperature in retrofit or filled pipe applications. These sensors have a bendable copper sensing plate that forms to the curvature of the pipe, along with an adjustable hose clamp that holds the unit in place around the pipe. They measure the water temperature by sensing the surface temperature of the pipe.

The ZS clamp-on strap sensors connect directly to the dedicated sensor network (Rnet) of a Carrier i-Vu controller. This communicating sensor network supports up to 15 ZS sensors through a single port, eliminating the need to consume multiple inputs on the controller.
 

Sensing Element Range: 20° to 120°F (-5° to 50°C)
Accuracy: ±0.36°F (0.2°C)
Sensor Range: 20° to 120°F (-5° to 50°C)
Accuracy: ±0.9°F (0.5°C)
Enclosure Material Polycarbonate, UL94V-0
Enclosure Rating NEMA 4, IP66, UV rated
Enclosure Dimensions Width: 5 in. (12.7 cm)
Height: 4.15 in. (10.54 cm)
Depth: 2.5 in. (6.35 cm)
Sensor Pad 1.25” (3.18 cm) diameter copper
Power Requirements 12 Vdc @ 6 mA
Power Supply The 4-conductor Rnet cable from a controller supplies +12 Vdc @ 210 mA. For additional power, use an external power supply. Use the above power requirements to calculate the size of the external power supply. The controller and the external power supply must share a common ground.
Communication 115 kbps
Environmental operating range -40 to 158°F (-40 to 70°C)
Mounting .5 in. (1.27 cm) stainless steel worm gear hose clamp
Listed by FCC Part 15-Subpart B-Class B, CE

Please leave your enquiry here, we will reply as soon as possible.


*only support gif, jpeg, jpg, png, pdf
Switch To Desktop Version